Anti-theft windows are one of the guarantees of family safety. Therefore, people also attach great importance to the purchase of anti-theft windows. There are several materials for anti-theft windows. Among them, stainless steel anti-theft windows have been well received by many householders. What are the precautions for installing stainless steel anti-theft windows?

What are the precautions for installing stainless steel anti-theft windows

1. The processing table of the stainless steel anti-theft window should be covered with rubber sheets or other soft cushions to avoid damage to the stainless steel surface. Whether it is the raw material of the stainless steel window or the processed parts during transportation, loading and unloading, special hoisting and transportation tools should be used to avoid stainless steel and other sharp points. Contact with hard carbon steel can cause bumps and scratches on the surface.

2. When stainless steel parts are blanked, the plates should be cut or plasma cut; pipes and other profiles should be cut by plasma or sawing. Lay a rubber cushion when cutting to avoid damaging the surface; after plasma cutting, the cutting slag should be cleaned up in time; when sawing, the clamping place should be cushioned for protection. After sawing, clean up the oil and residue in the sawing place in time.




3. Before installing the stainless steel window, you must carefully remove the oil and dust on the surface. Argon arc welding should be used as much as possible when welding. If manual arc welding is selected, fast welding with small current should be used. Start the arc in the non-welded area. The ground wire used should be connected at a suitable location to avoid arc burns on the surface or excessive burn area. Splash-proof measures should be taken during welding.

4. After the stainless steel anti-theft window is welded, the surface needs to be cleaned and cleaned in time. After the surface of the stainless steel anti-theft window is cleaned, care must be taken to protect the finished product to avoid personal touch and avoid secondary pollution by oil or dust.